Article number – 1410.0023
Operational wight – 1.5 – 4 t
Standard weight – 160 kg
Oil flow – 30 l/min
Oil flow rotation – 10 l/min
Operating pressure –  300 bar
Height – 765 mm
Amount of cilinders – 1
Closing force – 15 kN
Nr. of rotation motors – 1
Operating pressure rotation – 170 – 210 bar
Width opened – 1.100 mm
Shell width small – 450 mm
Shell width wide –  330 mm
Minimum diameter – 80 mm


Description DHG150-7T-R Hydraulic timber grab with rotation 1,5 – 4 ton

  • High manoeuvrability due to 360º hydraulic rotation – DSG-R
  • From the DHG602-R up, all models are equipped with dual rotation motors. A great benefit of this is that power distribution on the slewing ring is much better.
  • Wear-resistant Hardox 400 cutting Edges All DHG-R timber grabs are equipped with an substantial slewing ring. As a result, all models are ultimately suitable for the heaviest applications, even for demolition work.
  • From the DHG802 up, all models are equipped with two cylinders. Consequently the power distribution is much better on the shells, as a result of which they close simultaneously.
  • Due to the special cylinder design and the equaliser, movement is kept to a minimum, resulting in almost no wear to the internal hoses.
  • DHG timber grabs cylinders are equipped with cushion dampening, resulting in the shells closing without creating shocks to the excavator or damage to the main frame of the grab.


  • Available with load holding valve
  • Sprayed in the required colour
  • Doubling of the rotation motors