DHG1900-7T-R HYDRAULIC TIMBER GRAB WITH ROTATION 25 – 38 TON

Article number – 1410.0047
Operational wight – 25 – 38 t

Standard weight – 2.050 kg

Oil flow – 170 l/min
Oil flow rotation – 35 l/min
Operating pressure –  350 bar
Height – 1.550 mm
Amount of cilinders – 2
Closing force – 68 kN
Nr. of rotation motors – 2
Operating pressure rotation – 190 – 210 bar
Width opened – 2.250 mm
Shell width small – 1.230 mm
Shell width wide –  840 mm
Minimum diameter – 200 mm

Apraksts

Description DHG1900-7T-R Hydraulic timber grab with rotation 25 – 38 ton

  • High manoeuvrability due to 360º hydraulic rotation – DSG-R
  • From the DHG602-R up, all models are equipped with dual rotation motors. A great benefit of this is that power distribution on the slewing ring is much better.
  • Wear-resistant Hardox 400 cutting Edges All DHG-R timber grabs are equipped with an substantial slewing ring. As a result, all models are ultimately suitable for the heaviest applications, even for demolition work.
  • From the DHG802 up, all models are equipped with two cylinders. Consequently the power distribution is much better on the shells, as a result of which they close simultaneously.
  • Due to the special cylinder design and the equaliser, movement is kept to a minimum, resulting in almost no wear to the internal hoses.
  • DHG timber grabs cylinders are equipped with cushion dampening, resulting in the shells closing without creating shocks to the excavator or damage to the main frame of the grab.

Optional

  • Available with load holding valve
  • Sprayed in the required colour
  • Doubling of the rotation motors