DHG150-7T-R HYDRAULIC TIMBER GRAB WITH ROTATION 1,5 — 4 TON

Article number — 1410.0023
Operational wight — 1.5 — 4 t
Standard weight — 160 kg
Oil flow — 30 l/min
Oil flow rotation — 10 l/min
Operating pressure —  300 bar
Height — 765 mm
Amount of cilinders — 1
Closing force — 15 kN
Nr. of rotation motors — 1
Operating pressure rotation — 170 — 210 bar
Width opened — 1.100 mm
Shell width small — 450 mm
Shell width wide —  330 mm
Minimum diameter — 80 mm
Категория:

Описание

Description DHG150-7T-R Hydraulic timber grab with rotation 1,5 — 4 ton

  • High manoeuvrability due to 360º hydraulic rotation — DSG-R
  • From the DHG602-R up, all models are equipped with dual rotation motors. A great benefit of this is that power distribution on the slewing ring is much better.
  • Wear-resistant Hardox 400 cutting Edges All DHG-R timber grabs are equipped with an substantial slewing ring. As a result, all models are ultimately suitable for the heaviest applications, even for demolition work.
  • From the DHG802 up, all models are equipped with two cylinders. Consequently the power distribution is much better on the shells, as a result of which they close simultaneously.
  • Due to the special cylinder design and the equaliser, movement is kept to a minimum, resulting in almost no wear to the internal hoses.
  • DHG timber grabs cylinders are equipped with cushion dampening, resulting in the shells closing without creating shocks to the excavator or damage to the main frame of the grab.

Optional

  • Available with load holding valve
  • Sprayed in the required colour
  • Doubling of the rotation motors

Похожие товары